|
|
1.THEN REMOVE ALL OILS ,MOLD COATINGS, ECT. BY .SOLVEMENT CLEAING ,FINAL RINSE CLEAN SOLVENT.. }+ a( i) v; G; k4 Q8 ~/ P
2.MASK SURFACES AS SHOWN ON DRAWING .) u0 q( @7 ^3 w; z# Q4 Y" v
3.ABRASIVE OUTER SURFACES PER SSPC-SP10.
r5 p6 C: z9 ~# dNOTE: IF THE REQUIRMENTS FOR DISCOLORATION AND TO A SURFACE PROFILE OF 1.5 MILS CONFLICT CONCENTRATE ON PROFILE. / |: ?) S. N# s0 x9 t: c& o2 R( ^
NOTE : MUST SIGN AFIDAVIT .NO MORE THAN 12 HOURS ELAPSED BETWEEN GRIT BLAST AND PAINT.6 Q5 V/ y+ Z& d0 P- X9 a. p
4.CLEAN OFF ALL DUST WITH A VACUUM.! w. k9 V4 d6 X
5.APPLY ONE COATING OF TNEMEC 140-1255(BEIGE) POLYAMIDOAMINE EPOXY ,PRIMER COAT ALL OVER 4 MILS DRY FILM THICKNESS 7 MILS WET FILM THICKNESS
& {6 C6 n- r7 z; \5 a, l% s" G" D2 o6.FILL OUT PAINT QUALITY ASSURANCE FORM .0 z* e' q& ^! P: ~6 X
7.AFTER PAINT IS DRY REMOVE THE MASKING.3 i9 ?+ L5 i7 c7 ?, p: [
大家好，上面7句是關于油漆的說明，有哪位仁兄能幫忙翻譯以下，特別是第3，4，5，6條。小弟在此感激不盡 |
|
發表于 2009-11-28 10:03:28
QQ好友和群
QQ空間